GAPIGAPISensor · System · Service中文 ↗
Airbag Testing System

Airbag deployment test system

安全气囊点爆测试系统

An integrated system for temperature conditioning, controlled firing, electrical measurements and synchronized high-speed imaging.

Firing channels2 independent power supplies and channels
Low-range firing current1.2–1.5 A; duration ≥2 ms
High-range firing current1.75–2.05 A; duration ≥0.5 ms
External trigger outputsAt least 4 BNC outputs

Images illustrate appearance. Confirm range, interfaces and custom options with an engineer.

TECHNICAL DATA

Specifications

Airbag Deployment Test System
Airbag deployment test system

Firing channels2 independent power supplies and channels
Low-range firing current1.2–1.5 A; duration ≥2 ms
High-range firing current1.75–2.05 A; duration ≥0.5 ms
External trigger outputsAt least 4 BNC outputs
Thermocouple inputsAt least 4 inputs and 4 thermocouples
Temperature measurement−40 °C to +110 °C; accuracy ±1 °C
Temperature recordingSampling ≥1 Hz; continuous recording up to 24 h
Electrical measurementsFiring current, voltage and pre/post-test module resistance
Pulse adjustmentIndependently adjustable start time, duration and amplitude
Protection and alarmsShort-circuit protection; short/open circuit and resistance-limit alarms
Peripheral controlLED lighting, exhaust and environmental-chamber door control
Camera triggerTriggered by PAB firing signal; external trigger compatibility required
Workstation1 workstation; ≥16 GB RAM; 2 displays
Test recordsSpecimen data, temperature/humidity, pulse curves, resistance and deployment timing
Test modesAutomatic firing after temperature conditioning / ambient-temperature firing

Specifications follow the supplied airbag system material. Confirm displays, interfaces and interlocks for the project. System overview ↗

SELECTION SUPPORT

Match the configuration to your test

01 / GAPI

Operating conditions

Describe the test, measured quantity, temperature and installation space.

02 / GAPI

Measurement chain

Confirm range, output signals, acquisition equipment and interfaces.

03 / GAPI

Delivery configuration

Agree cable lengths, connectors, calibration and other project options.

LET’S TALK

Turn your test requirements into a suitable configuration

Tell us about your application, measurement points and technical requirements.

Talk to an engineer ↗
↑